Gas Pipeline Systems<\/h1><\/div>ENGINEERED FOR EXCELLENCE<\/h2><\/div><\/div><\/div><\/div><\/div>![](\"https:\/\/nmtester.com\/kontihidroplast\/wp-content\/uploads\/2024\/11\/Gas-gore.jpg\" "\\"Gas")
<\/span><\/div><\/div><\/div>Polyethylene gas pipes are made of PE 80 and PE 100 materials, and are intended for distribution of gas through a network, up to working pressure of 10 bar. The main performance characteristics of PE 80 and PE 100 gas pipes are determined by their material properties and applications.<\/p>\n
PE 80 (Medium Density Polyethylene) are designed for medium-pressure applications and offer good flexibility and durability. PE 100 (High-Density Polyethylene) have higher density and strength compared to PE 80 and are designed for high-pressure systems.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
GAS<\/h2><\/div><\/div><\/div>Polyethylene gas pipes are made of PE 80 and PE 100, and are intended for distribution of gas through a network, up to working pressure of 10 bar.<\/p>\n
Color: <\/b>Black with longitudinal yellow lines, or yellow color for PE 80, and black with yellow lines or orange color for PE 100.<\/p>\n
Standards: <\/b>EN 1555-2 and ISO 4437.<\/p>\n
PE 80 (Medium Density Polyethylene):<\/b><\/p>\n\n- Designed for medium-pressure applications.<\/li>\n
- Offers good flexibility and durability.<\/li>\n
- Suitable for smaller diameter and lower pressure systems.<\/li>\n<\/ul>\n
PE 100 (High-Density Polyethylene):<\/b><\/p>\n\n- Higher density and strength compared to PE 80.<\/li>\n
- Designed for high-pressure systems.<\/li>\n
- Enables thinner wall thickness for the same pressure class, leading to reduced weight and cost savings.<\/li>\n
- Longer service life due to improved resistance to stress cracking and environmental stress.<\/li>\n<\/ul>\n
PE 80 is preferred for low to medium-pressure systems with smaller diameters, while PE 100 is ideal for high-pressure systems, larger diameters, and long-term, demanding applications.<\/p>\n<\/div><\/div><\/div>
![](\"https:\/\/nmtester.com\/kontihidroplast\/wp-content\/uploads\/2024\/11\/gas-1.jpg\" "\\"gas")
<\/span><\/div><\/i>Download Specs<\/span><\/a><\/div><\/div><\/div>![](\"https:\/\/nmtester.com\/kontihidroplast\/wp-content\/uploads\/2024\/11\/gas-2.jpg\" "\\"gas")
<\/span><\/div><\/i>Download Brochure<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>Petroleum derivatives<\/h2><\/div><\/div><\/div>Konti Petrol gas pipe is a double-layered pipe with outer black surface made of PE100 standards, the same that apply for the classic PE i.e. EN 1555 or ISO 4437.<\/p>\n
Color: <\/b>Black with orange longitudinal lines on the outer layer, and orange inner layer.<\/p>\n
Advantages of internal PE 100-X layer:<\/b><\/p>\n\n- Excellent resistance to volatile organic compounds from petroleum derivatives and prevents their crossing in the environment<\/li>\n
- Protecting groundwater from impurities from the oil derivatives<\/li>\n
- Resistance to extreme temperatures 35S to 85S<\/li>\n
- Higher chemical resistance of the pipe<\/li>\n
- Excellent resistance to abrasion<\/li>\n<\/ul>\n
Application:<\/b><\/p>\n\n- Transport of petrol diesel and other fuels in stations and refinery<\/li>\n
- Gas distribution<\/li>\n
- Special industrial application<\/li>\n
- Geothermal and city heating<\/li>\n<\/ul>\n
Dimensions: <\/b>PE100-PE100-X pipes are produced in dimensions from 20mm to 250mm<\/p>\n<\/div><\/div><\/div>![](\"https:\/\/nmtester.com\/kontihidroplast\/wp-content\/uploads\/2024\/12\/Gogo_20240703_8900-Edit_1.jpg\" "\\"Gogo_20240703_8900-Edit_1\\"")
<\/span><\/div><\/i>Download Specs<\/span><\/a><\/div><\/div><\/div>![](\"https:\/\/nmtester.com\/kontihidroplast\/wp-content\/uploads\/2024\/12\/Gogo_20240703_9145-Edit_1-min.jpg\" "\\"Gogo_20240703_9145-Edit_1-min\\"")
<\/span><\/div><\/i>Download Brochure<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>PE fittings<\/h2><\/div>\n- Butt Welding<\/a><\/li>\n
- Electrofusion Fittings<\/a><\/li>\n<\/ul><\/div><\/div>
![](\"https:\/\/nmtester.com\/kontihidroplast\/wp-content\/uploads\/2024\/08\/pdf-blue.png\")
Fitting Stub Ends (Welding Collars)<\/a><\/p>\nFitting – FF Piece<\/a><\/p>\nFitting – Metal Flange<\/a><\/p>\nFitting – Elbow 11\u00b0-12\u00b0-30\u00b0<\/a><\/p>\nFitting – Elbow 45\u00b0<\/a><\/p>\nFitting – Elbow 60\u00b0<\/a><\/p>\nFitting – Elbow 90\u00b0<\/a><\/p>\nFitting – Concentric Reducer<\/p>\n
Fitting – End Cup<\/p>\n
Fitting – Tee Outlet Without Reinforcement<\/a><\/p>\nFitting – Tee Outlet Reducer<\/p>\n
Fitting – Tee Outlet<\/p>\n<\/div><\/div><\/div>
![](\"https:\/\/nmtester.com\/kontihidroplast\/wp-content\/uploads\/2024\/08\/Butt-Wealding-min.png\" "\\"Butt")
<\/span><\/div><\/div><\/div><\/div><\/div><\/div>Electrofusion Socket<\/a><\/p>\nElectrofusion Tee Outlet<\/a><\/p>\nElectrofusion Tee Reducer<\/a><\/p>\nElectrofusion Elbow 45\u00b0<\/a><\/p>\nElectrofusion Elbow 90\u00b0<\/a><\/p>\nElectrofusion Reducer<\/a><\/p>\nElectrofusion End Cap<\/a><\/p>\nElectrofusion Adapter Socket Integrated Welding Module Male Thread Out Of Brass<\/a><\/p>\nElectrofusion Adapter Elbow 45\u00b0 Integrated Welding Module Male Thread Out Of Brass <\/a><\/p>\nElectrofusion Adapter Elbow 90\u00b0 Integrated Welding Module Male Thread Out Of Brass <\/a><\/p>\nTapping Saddle With Electrofusion Sealing Cap Integrated Welding Module<\/a><\/p>\nUniversal Tapping Valve With Thread Insert Out Of Brass Integrated Welding Module<\/a><\/p>\nPlastic Tapping Valve With Integrated Cutter Integrated Welding Module<\/a><\/p>\n
ENGINEERED FOR EXCELLENCE<\/h2><\/div><\/div><\/div><\/div><\/div><\/span><\/div><\/div><\/div>Polyethylene gas pipes are made of PE 80 and PE 100 materials, and are intended for distribution of gas through a network, up to working pressure of 10 bar. The main performance characteristics of PE 80 and PE 100 gas pipes are determined by their material properties and applications.<\/p>\n
PE 80 (Medium Density Polyethylene) are designed for medium-pressure applications and offer good flexibility and durability. PE 100 (High-Density Polyethylene) have higher density and strength compared to PE 80 and are designed for high-pressure systems.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
GAS<\/h2><\/div><\/div><\/div>Polyethylene gas pipes are made of PE 80 and PE 100, and are intended for distribution of gas through a network, up to working pressure of 10 bar.<\/p>\n
Color: <\/b>Black with longitudinal yellow lines, or yellow color for PE 80, and black with yellow lines or orange color for PE 100.<\/p>\n
Standards: <\/b>EN 1555-2 and ISO 4437.<\/p>\n
PE 80 (Medium Density Polyethylene):<\/b><\/p>\n\n- Designed for medium-pressure applications.<\/li>\n
- Offers good flexibility and durability.<\/li>\n
- Suitable for smaller diameter and lower pressure systems.<\/li>\n<\/ul>\n
PE 100 (High-Density Polyethylene):<\/b><\/p>\n\n- Higher density and strength compared to PE 80.<\/li>\n
- Designed for high-pressure systems.<\/li>\n
- Enables thinner wall thickness for the same pressure class, leading to reduced weight and cost savings.<\/li>\n
- Longer service life due to improved resistance to stress cracking and environmental stress.<\/li>\n<\/ul>\n
PE 80 is preferred for low to medium-pressure systems with smaller diameters, while PE 100 is ideal for high-pressure systems, larger diameters, and long-term, demanding applications.<\/p>\n<\/div><\/div><\/div>
<\/span><\/div><\/i>Download Specs<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/i>Download Brochure<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>Petroleum derivatives<\/h2><\/div><\/div><\/div>Konti Petrol gas pipe is a double-layered pipe with outer black surface made of PE100 standards, the same that apply for the classic PE i.e. EN 1555 or ISO 4437.<\/p>\n
Color: <\/b>Black with orange longitudinal lines on the outer layer, and orange inner layer.<\/p>\n
Advantages of internal PE 100-X layer:<\/b><\/p>\n\n- Excellent resistance to volatile organic compounds from petroleum derivatives and prevents their crossing in the environment<\/li>\n
- Protecting groundwater from impurities from the oil derivatives<\/li>\n
- Resistance to extreme temperatures 35S to 85S<\/li>\n
- Higher chemical resistance of the pipe<\/li>\n
- Excellent resistance to abrasion<\/li>\n<\/ul>\n
Application:<\/b><\/p>\n\n- Transport of petrol diesel and other fuels in stations and refinery<\/li>\n
- Gas distribution<\/li>\n
- Special industrial application<\/li>\n
- Geothermal and city heating<\/li>\n<\/ul>\n
Dimensions: <\/b>PE100-PE100-X pipes are produced in dimensions from 20mm to 250mm<\/p>\n<\/div><\/div><\/div><\/span><\/div><\/i>Download Specs<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/i>Download Brochure<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>PE fittings<\/h2><\/div>\n- Butt Welding<\/a><\/li>\n
- Electrofusion Fittings<\/a><\/li>\n<\/ul><\/div><\/div>
Fitting Stub Ends (Welding Collars)<\/a><\/p>\nFitting – FF Piece<\/a><\/p>\nFitting – Metal Flange<\/a><\/p>\nFitting – Elbow 11\u00b0-12\u00b0-30\u00b0<\/a><\/p>\nFitting – Elbow 45\u00b0<\/a><\/p>\nFitting – Elbow 60\u00b0<\/a><\/p>\nFitting – Elbow 90\u00b0<\/a><\/p>\nFitting – Concentric Reducer<\/p>\n
Fitting – End Cup<\/p>\n
Fitting – Tee Outlet Without Reinforcement<\/a><\/p>\nFitting – Tee Outlet Reducer<\/p>\n
Fitting – Tee Outlet<\/p>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/div><\/div><\/div><\/div>Electrofusion Socket<\/a><\/p>\nElectrofusion Tee Outlet<\/a><\/p>\nElectrofusion Tee Reducer<\/a><\/p>\nElectrofusion Elbow 45\u00b0<\/a><\/p>\nElectrofusion Elbow 90\u00b0<\/a><\/p>\nElectrofusion Reducer<\/a><\/p>\nElectrofusion End Cap<\/a><\/p>\nElectrofusion Adapter Socket Integrated Welding Module Male Thread Out Of Brass<\/a><\/p>\nElectrofusion Adapter Elbow 45\u00b0 Integrated Welding Module Male Thread Out Of Brass <\/a><\/p>\nElectrofusion Adapter Elbow 90\u00b0 Integrated Welding Module Male Thread Out Of Brass <\/a><\/p>\nTapping Saddle With Electrofusion Sealing Cap Integrated Welding Module<\/a><\/p>\nUniversal Tapping Valve With Thread Insert Out Of Brass Integrated Welding Module<\/a><\/p>\nPlastic Tapping Valve With Integrated Cutter Integrated Welding Module<\/a><\/p>\n
<\/span><\/div><\/div><\/div>Polyethylene gas pipes are made of PE 80 and PE 100 materials, and are intended for distribution of gas through a network, up to working pressure of 10 bar. The main performance characteristics of PE 80 and PE 100 gas pipes are determined by their material properties and applications.<\/p>\n
PE 80 (Medium Density Polyethylene) are designed for medium-pressure applications and offer good flexibility and durability. PE 100 (High-Density Polyethylene) have higher density and strength compared to PE 80 and are designed for high-pressure systems.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
GAS<\/h2><\/div><\/div><\/div>Polyethylene gas pipes are made of PE 80 and PE 100, and are intended for distribution of gas through a network, up to working pressure of 10 bar.<\/p>\n
Color: <\/b>Black with longitudinal yellow lines, or yellow color for PE 80, and black with yellow lines or orange color for PE 100.<\/p>\n
Standards: <\/b>EN 1555-2 and ISO 4437.<\/p>\n
PE 80 (Medium Density Polyethylene):<\/b><\/p>\n\n- Designed for medium-pressure applications.<\/li>\n
- Offers good flexibility and durability.<\/li>\n
- Suitable for smaller diameter and lower pressure systems.<\/li>\n<\/ul>\n
PE 100 (High-Density Polyethylene):<\/b><\/p>\n\n- Higher density and strength compared to PE 80.<\/li>\n
- Designed for high-pressure systems.<\/li>\n
- Enables thinner wall thickness for the same pressure class, leading to reduced weight and cost savings.<\/li>\n
- Longer service life due to improved resistance to stress cracking and environmental stress.<\/li>\n<\/ul>\n
PE 80 is preferred for low to medium-pressure systems with smaller diameters, while PE 100 is ideal for high-pressure systems, larger diameters, and long-term, demanding applications.<\/p>\n<\/div><\/div><\/div>
<\/span><\/div><\/i>Download Specs<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/i>Download Brochure<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>Petroleum derivatives<\/h2><\/div><\/div><\/div>Konti Petrol gas pipe is a double-layered pipe with outer black surface made of PE100 standards, the same that apply for the classic PE i.e. EN 1555 or ISO 4437.<\/p>\n
Color: <\/b>Black with orange longitudinal lines on the outer layer, and orange inner layer.<\/p>\n
Advantages of internal PE 100-X layer:<\/b><\/p>\n\n- Excellent resistance to volatile organic compounds from petroleum derivatives and prevents their crossing in the environment<\/li>\n
- Protecting groundwater from impurities from the oil derivatives<\/li>\n
- Resistance to extreme temperatures 35S to 85S<\/li>\n
- Higher chemical resistance of the pipe<\/li>\n
- Excellent resistance to abrasion<\/li>\n<\/ul>\n
Application:<\/b><\/p>\n\n- Transport of petrol diesel and other fuels in stations and refinery<\/li>\n
- Gas distribution<\/li>\n
- Special industrial application<\/li>\n
- Geothermal and city heating<\/li>\n<\/ul>\n
Dimensions: <\/b>PE100-PE100-X pipes are produced in dimensions from 20mm to 250mm<\/p>\n<\/div><\/div><\/div><\/span><\/div><\/i>Download Specs<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/i>Download Brochure<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>PE fittings<\/h2><\/div>\n- Butt Welding<\/a><\/li>\n
- Electrofusion Fittings<\/a><\/li>\n<\/ul><\/div><\/div>
Fitting Stub Ends (Welding Collars)<\/a><\/p>\nFitting – FF Piece<\/a><\/p>\nFitting – Metal Flange<\/a><\/p>\nFitting – Elbow 11\u00b0-12\u00b0-30\u00b0<\/a><\/p>\nFitting – Elbow 45\u00b0<\/a><\/p>\nFitting – Elbow 60\u00b0<\/a><\/p>\nFitting – Elbow 90\u00b0<\/a><\/p>\nFitting – Concentric Reducer<\/p>\n
Fitting – End Cup<\/p>\n
Fitting – Tee Outlet Without Reinforcement<\/a><\/p>\nFitting – Tee Outlet Reducer<\/p>\n
Fitting – Tee Outlet<\/p>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/div><\/div><\/div><\/div>Electrofusion Socket<\/a><\/p>\nElectrofusion Tee Outlet<\/a><\/p>\nElectrofusion Tee Reducer<\/a><\/p>\nElectrofusion Elbow 45\u00b0<\/a><\/p>\nElectrofusion Elbow 90\u00b0<\/a><\/p>\nElectrofusion Reducer<\/a><\/p>\nElectrofusion End Cap<\/a><\/p>\nElectrofusion Adapter Socket Integrated Welding Module Male Thread Out Of Brass<\/a><\/p>\nElectrofusion Adapter Elbow 45\u00b0 Integrated Welding Module Male Thread Out Of Brass <\/a><\/p>\nElectrofusion Adapter Elbow 90\u00b0 Integrated Welding Module Male Thread Out Of Brass <\/a><\/p>\nTapping Saddle With Electrofusion Sealing Cap Integrated Welding Module<\/a><\/p>\nUniversal Tapping Valve With Thread Insert Out Of Brass Integrated Welding Module<\/a><\/p>\nPlastic Tapping Valve With Integrated Cutter Integrated Welding Module<\/a><\/p>\n
Polyethylene gas pipes are made of PE 80 and PE 100, and are intended for distribution of gas through a network, up to working pressure of 10 bar.<\/p>\n
Color: <\/b>Black with longitudinal yellow lines, or yellow color for PE 80, and black with yellow lines or orange color for PE 100.<\/p>\n
Standards: <\/b>EN 1555-2 and ISO 4437.<\/p>\n
PE 80 (Medium Density Polyethylene):<\/b><\/p>\n PE 100 (High-Density Polyethylene):<\/b><\/p>\n PE 80 is preferred for low to medium-pressure systems with smaller diameters, while PE 100 is ideal for high-pressure systems, larger diameters, and long-term, demanding applications.<\/p>\n<\/div><\/div><\/div> Konti Petrol gas pipe is a double-layered pipe with outer black surface made of PE100 standards, the same that apply for the classic PE i.e. EN 1555 or ISO 4437.<\/p>\n Color: <\/b>Black with orange longitudinal lines on the outer layer, and orange inner layer.<\/p>\n Advantages of internal PE 100-X layer:<\/b><\/p>\n Application:<\/b><\/p>\n Dimensions: <\/b>PE100-PE100-X pipes are produced in dimensions from 20mm to 250mm<\/p>\n<\/div><\/div><\/div>\n
\n
<\/span><\/div><\/span><\/div>Petroleum derivatives<\/h2><\/div><\/div><\/div>
\n
\n
<\/span><\/div><\/span><\/div>PE fittings<\/h2><\/div>
\n
Fitting Stub Ends (Welding Collars)<\/a><\/p>\nFitting – FF Piece<\/a><\/p>\nFitting – Metal Flange<\/a><\/p>\nFitting – Elbow 11\u00b0-12\u00b0-30\u00b0<\/a><\/p>\nFitting – Elbow 45\u00b0<\/a><\/p>\nFitting – Elbow 60\u00b0<\/a><\/p>\nFitting – Elbow 90\u00b0<\/a><\/p>\nFitting – Concentric Reducer<\/p>\nFitting – End Cup<\/p>\nFitting – Tee Outlet Without Reinforcement<\/a><\/p>\nFitting – Tee Outlet Reducer<\/p>\nFitting – Tee Outlet<\/p>\n<\/div><\/div><\/div><\/span><\/div><\/div><\/div><\/div><\/div><\/div>Electrofusion Socket<\/a><\/p>\nElectrofusion Tee Outlet<\/a><\/p>\nElectrofusion Tee Reducer<\/a><\/p>\nElectrofusion Elbow 45\u00b0<\/a><\/p>\nElectrofusion Elbow 90\u00b0<\/a><\/p>\nElectrofusion Reducer<\/a><\/p>\nElectrofusion End Cap<\/a><\/p>\nElectrofusion Adapter Socket Integrated Welding Module Male Thread Out Of Brass<\/a><\/p>\nElectrofusion Adapter Elbow 45\u00b0 Integrated Welding Module Male Thread Out Of Brass <\/a><\/p>\nElectrofusion Adapter Elbow 90\u00b0 Integrated Welding Module Male Thread Out Of Brass <\/a><\/p>\nTapping Saddle With Electrofusion Sealing Cap Integrated Welding Module<\/a><\/p>\nUniversal Tapping Valve With Thread Insert Out Of Brass Integrated Welding Module<\/a><\/p>\nPlastic Tapping Valve With Integrated Cutter Integrated Welding Module<\/a><\/p>\n
![](\"https:\/\/nmtester.com\/kontihidroplast\/wp-content\/uploads\/2024\/08\/Electrofusion-fittings-min.png\" "\\"Electrofusion")
<\/span><\/div><\/div><\/div><\/div><\/div><\/div>